EVAPO-RUST Cooling System Flush.

SAFELY REMOVE RUST FROM ENGINE BLOCKS & COOLING SYSTEM

PRICING:
CSF0005LR   Cooling System Flush   5L            $49.50
CSF0020LR   Cooling System Flush  20L           $175.00
CSF0200LR   Cooling System Flush  200L       
*All Prices for our products are GST inc based on products being picked up - We can arrange delivery Australia Wide and Freight will be charged at normal roadfreight rates.

EVAPO-RUSTTM Cooling System Flush is a concentrated rust removing formulation based on our 3-TIME AWARD WINNING rust remover technology.
EVAPO-RUSTTM Cooling System Flush, when used as directed, is non-corrosive to steel and will not harm copper, brass, aluminum, plastic, rubber, silicone, wood or vinyl. EVAPO-RUSTTM Cooling System Flush will not remove coatings such as non-oxide paint or chrome that are still bonded to the surface. Not for use with magnesium or magnesium alloys.

For Professional Restoration!

* No tear-downs
* Fast acting
* Easy to use
* Professional results
* Non-Toxic
* Non-Flammable
* Non-Corrosive
* Biodegradable

TYPICAL PROPERTIES

* Appearance Amber, Slightly Viscous
* Odor Mild odor
* pH @ 1% 6.0 – 7.0
* Environmental Data Biodegradable

Instructions For Use:

1. Remove Coolant and replace with cooling system flush. It is recommended that you should run the vehicle for at least 8 to 10 hours before draining Cooling System Flush.  You may drive the vehicle normally during this period.
2. Drain cooling system and flush with water.
3. Refill cooling system with water and high quality coolant mixed to manufacturers specification.
4. Rebottle CSF when drained as this product can be used over until completely spent ( Saturated )

Cooling System Flush is not recommended to be left in engine blocks when temperatures fall below    0º degrees Celsius.

For all product Sales please call Andrew on: 07 5578 3088